Fischer Panda — Replacement of the fuel filter
Maintenance
From a Fischer Panda owner's manual covering: 10000i PMS, Panda 10000, Panda 8000. Check it applies to your exact model before use.
Applies to: Fischer Panda 10000i PMS, Fischer Panda G 08000i PMS 270-370-3 G3 Basic
Before you start
- Clamped inlet and fuel spill precautions required.
Parts for this job
- 1258143013 Fuel filter — Fischer Panda 10000i PMS Amazon eBay $17.87 PartsGeek $6.98 KuduParts $10.00
- 02-150-000-00 Fuel filter — Fischer Panda G 08000i PMS 270-370-3 G3 Basic Amazon eBay
Part numbers from the service-parts lists for Fischer Panda 10000i PMS, Fischer Panda G 08000i PMS 270-370-3 G3 Basic. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Clamp inlet before exchanging the filter.
- Remove hoses from used filter.
- Fasten hoses to new filter; observe arrow for fuel flow direction.
- For sight-glass version: unscrew housing and element left-hand.
- Screw new filter element into mount.
- Lubricate sight glass O-ring with Antiseize and screw sight glass back right-hand.
Specs & values
- Replace after 300 operating hours at the latest
Full service-parts list: Fischer Panda 10000i PMS →, Fischer Panda G 08000i PMS 270-370-3 G3 Basic →
Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.