Fischer Panda — Replace the air filter main element
Maintenance
From a Fischer Panda owner's manual covering: 10000i PMS, Panda 10000, Panda 8000. Check it applies to your exact model before use.
Applies to: Fischer Panda 10000i PMS, Fischer Panda G 08000i PMS 270-370-3 G3 Basic
Parts for this job
- RG15842930 Air filter — Fischer Panda 10000i PMS Amazon eBay $15.50 PartsGeek $23.97 FridayParts $16.50
- 02-145-000-00 Air filter — Fischer Panda G 08000i PMS 270-370-3 G3 Basic Amazon eBay
Part numbers from the service-parts lists for Fischer Panda 10000i PMS, Fischer Panda G 08000i PMS 270-370-3 G3 Basic. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Use screwdriver to lever out tension spring.
- Lift the air filter housing.
- Release three snap fastenings and remove lower housing part.
- Remove main element with light turning movement from inner support pipe.
- Clean by blowing out with dry compressed air max. 5 bar or replace after 2 years at latest.
- Reassemble in reverse order.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Max. compressed air pressure: 5 bar
- Replace after 2 years at the latest
Full service-parts list: Fischer Panda 10000i PMS →, Fischer Panda G 08000i PMS 270-370-3 G3 Basic →
Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.