Fischer Panda PMS 8 mini E-TEC / Panda PMS 8 mini E-TEC — Preparation for winter storage
Maintenance · Generator
For the Fischer Panda PMS 8 mini E-TEC / Panda PMS 8 mini E-TEC, from the Fischer Panda service manual.
Applies to: Icemaster GmbH (Fischer Panda) Panda PMS 8 mini E-TEC, Kubota Z482 engine
Procedure
- Rinse raw water circuit with anti-freeze solution.
- Check anti-freeze concentration in internal cooling circuit.
- Clean raw water filter and check seal.
- Check all hoses and hose connectors.
- Remove impeller, grease with vaseline, store in dark place.
- Disassemble, check and grease vent valve.
- Disconnect starter battery positive and negative poles.
- Lubricate speed adjustment spindle with Antiseize grease.
Full service-parts list: Icemaster GmbH (Fischer Panda) Panda PMS 8 mini E-TEC →, Kubota Z482 engine →
Source: Fischer Panda service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.