Home›Repair guides›Fischer Panda›Exchange the air filter

Fischer Panda PMS 8 mini E-TEC / Panda PMS 8 mini E-TEC — Exchange the air filter

Maintenance

For the Fischer Panda PMS 8 mini E-TEC / Panda PMS 8 mini E-TEC, from the Fischer Panda service manual.

Applies to: Icemaster GmbH (Fischer Panda) Panda PMS 8 mini E-TEC, Kubota Z482 engine

Parts for this job

Part numbers from the service-parts lists for Icemaster GmbH (Fischer Panda) Panda PMS 8 mini E-TEC, Kubota Z482 engine. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Loosen six screws on air suction housing cover.
  2. Open air suction housing.
  3. Change air filter mat.
  4. Reassemble cover.

Full service-parts list: Icemaster GmbH (Fischer Panda) Panda PMS 8 mini E-TEC →, Kubota Z482 engine →

Source: Fischer Panda service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Fischer Panda repair guides →