Home›Repair guides›Fischer Panda›Exchange of the fuel filter

Fischer Panda PMS 8 mini E-TEC / Panda PMS 8 mini E-TEC — Exchange of the fuel filter

Maintenance

For the Fischer Panda PMS 8 mini E-TEC / Panda PMS 8 mini E-TEC, from the Fischer Panda service manual.

Applies to: Icemaster GmbH (Fischer Panda) Panda PMS 8 mini E-TEC, Kubota Z482 engine

Parts for this job

Part numbers from the service-parts lists for Icemaster GmbH (Fischer Panda) Panda PMS 8 mini E-TEC, Kubota Z482 engine. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Clamp fuel inlet line before filter.
  2. Remove hoses from used filter.
  3. Fasten hoses to new filter, observing arrow for fuel flow direction.
  4. Check for leaks.

Specs & values

  • Replace at least every 300 operation hours

Full service-parts list: Icemaster GmbH (Fischer Panda) Panda PMS 8 mini E-TEC →, Kubota Z482 engine →

Source: Fischer Panda service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Fischer Panda repair guides →