Fischer Panda PMS 4200 FCB / Panda PMS 4200 FCB — Ventilating the fuel system
Maintenance
For the Fischer Panda PMS 4200 FCB / Panda PMS 4200 FCB, from the Fischer Panda operator's manual.
Applies to: Fischer Panda Panda PMS 4200 FCB, Farymann 18W430 engine
Before you start
- Hold absorbent cloth under screw to prevent fuel in sound cover.
Procedure
- Switch main power switch OFF.
- Disconnect clamp no. 5 of DC-terminal block.
- Switch main power switch ON for approx. 5 minutes; fuel pump airs fuel inlets.
- Do not press START button.
- Switch main power switch OFF.
- Reconnect clamp no. 5.
- If bubbles remain, open ventilation screw at fuel solenoid valve or injection line union and repeat.
Tools required
- Spanners Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Full service-parts list: Fischer Panda Panda PMS 4200 FCB →
Source: Fischer Panda operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.