Fischer Panda PMS 4200 FCB / Panda PMS 4200 FCB — Speed sensor installation
Adjustments
For the Fischer Panda PMS 4200 FCB / Panda PMS 4200 FCB, from the Fischer Panda operator's manual.
Applies to: Fischer Panda Panda PMS 4200 FCB, Farymann 18W430 engine
Before you start
- Do not screw sensor tip into root of gear tooth.
Procedure
- Align speed sensor tip with tip of gear tooth.
- Screw in sensor until it touches tooth tip.
- Turn screw anticlockwise half a turn (0.3 to 0.8 mm).
- Hold with counter nut.
Tools required
- Spanners Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Speed sensor air gap 0.3 to 0.8 mm
Full service-parts list: Fischer Panda Panda PMS 4200 FCB →
Source: Fischer Panda operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.