Fischer Panda PMS 4200 FCB / Panda PMS 4200 FCB — Replace the toothed-belt for internal cooling water pump
Maintenance · cooling water pump toothed-belt
For the Fischer Panda PMS 4200 FCB / Panda PMS 4200 FCB, from the Fischer Panda operator's manual.
Applies to: Fischer Panda Panda PMS 4200 FCB, Farymann 18W430 engine
Parts for this job
Part numbers from the service-parts list for Fischer Panda Panda PMS 4200 FCB. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Push toothed-belt carefully down with screwdriver from pulley toward water pump.
- Fit new toothed-belt by careful moving back and forth on pulley.
- Use screwdriver if helpful.
Tools required
- Screwdriver Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Type of belt: Gates Power Grip GT MR L660 5MR 475 6 692
- Control toothed-belt every 100 operating hours
Full service-parts list: Fischer Panda Panda PMS 4200 FCB →
Source: Fischer Panda operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.