Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Fischer Panda›De-aerating the fuel system

Fischer Panda Panda 5000i.Neo PMS — De-aerating the fuel system

Maintenance

For the Fischer Panda Panda 5000i.Neo PMS, from the Fischer Panda owner's manual.

Applies to: Fischer Panda Panda 5000i.Neo PMS, Fischer Panda FPE-320 engine

Procedure

  1. Place container under fuel return pipe to catch fuel.
  2. Switch panel ON.
  3. Activate fuel pump prime function in panel menu.
  4. Let pump run until fuel runs bubble-free out of return line.
  5. Repeat procedure several times until fuel withdraws perfectly.
  6. Switch panel OFF.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

  • Fuel pump prime function runs max. 30 seconds per activation.

Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Fischer Panda repair guides →