Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Fischer Panda›Accessing error memory on iControl2

Fischer Panda Panda 5000i.Neo PMS — Accessing error memory on iControl2

Testing & diagnosis · Panda iControl2

For the Fischer Panda Panda 5000i.Neo PMS, from the Fischer Panda owner's manual.

Applies to: Fischer Panda Panda 5000i.Neo PMS, Fischer Panda FPE-320 engine

Procedure

  1. Switch on controller while panda bear start screen is displayed.
  2. Press Cursor Down immediately to open set-up menu.
  3. Navigate with Cursor Up/Down; selected item is marked with two asterisks.
  4. Select 'Error mem.' and confirm with Start/Stop button.
  5. Read stored errors preceded by operating hour.
  6. Return to standby page with Start/Stop key.

Specs & values

  • Error memory stores last six errors.

Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Fischer Panda repair guides →