Home›Repair guides›Fischer Panda›Replace fuel filter

Fischer Panda Panda 4000s PMS FC / Panda 4000s PMS SC — Replace fuel filter

Maintenance

For the Fischer Panda Panda 4000s PMS FC / Panda 4000s PMS SC, from the Fischer Panda owner's manual.

Applies to: Fischer Panda Panda_4000s, Fischer Panda Panda_4000s SC PMS, Farymann 18W430 engine

Before you start

  • A clogged filter causes decreased power output.

Parts for this job

  • P01-005 Fuel filter — Fischer Panda Panda_4000s Amazon eBay
  • P01-005 Fuel filter — Fischer Panda Panda_4000s SC PMS Amazon eBay

Part numbers from the service-parts lists for Fischer Panda Panda_4000s, Fischer Panda Panda_4000s SC PMS. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Clamp fuel inlet before exchanging filter.
  2. Remove hoses from used filter.
  3. Fasten hoses to new filter.
  4. Observe arrow on filter housing for fuel flow direction.

Specs & values

  • Replace after 300 operational hours at the very least, depending on fuel contamination.

Full service-parts list: Fischer Panda Panda_4000s →, Fischer Panda Panda_4000s SC PMS →

Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Fischer Panda repair guides →