Fischer Panda Panda 4000s PMS FC / Panda 4000s PMS SC — Engine oil change
Maintenance
For the Fischer Panda Panda 4000s PMS FC / Panda 4000s PMS SC, from the Fischer Panda owner's manual.
Applies to: Fischer Panda Panda_4000s, Fischer Panda Panda_4000s SC PMS, Farymann 18W430 engine
Before you start
- Lubricating oil should be drained in warm condition.
Parts for this job
- P01-003 Oil filter — Fischer Panda Panda_4000s Amazon eBay
- P01-003 Oil filter — Fischer Panda Panda_4000s SC PMS Amazon eBay
Part numbers from the service-parts lists for Fischer Panda Panda_4000s, Fischer Panda Panda_4000s SC PMS. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Lead oil drain hose through sound cover.
- Open oil drain screw; use a second wrench to counter.
- Drain engine oil; oil should be drained warm.
- Close oil drain screw.
- Open oil filler neck and refill engine oil.
- Wait briefly for oil to settle.
- Check oil level on dipstick; recommended 2/3, do not exceed Max.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Oil capacity 1,25 l
- First oil change after 35-50 h; then every 150 h
- API CF oil
Full service-parts list: Fischer Panda Panda_4000s →, Fischer Panda Panda_4000s SC PMS →
Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.