Home›Repair guides›Fischer Panda›Checking the fuel solenoid valve

Fischer Panda Panda 4000s PMS FC / Panda 4000s PMS SC — Checking the fuel solenoid valve

Testing & diagnosis

For the Fischer Panda Panda 4000s PMS FC / Panda 4000s PMS SC, from the Fischer Panda owner's manual.

Applies to: Fischer Panda Panda_4000s, Fischer Panda Panda_4000s SC PMS, Farymann 18W430 engine

Procedure

  1. Locate fuel solenoid valve in front of injection pump.
  2. Remove small retention screw and plug from solenoid for a short period while operating.
  3. Replace plug immediately.
  4. Motor should react immediately by revving high.
  5. If motor does not react sharply, solenoid valve may be faulty.

Full service-parts list: Fischer Panda Panda_4000s →, Fischer Panda Panda_4000s SC PMS →

Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Fischer Panda repair guides →