Fischer Panda — De-aerating the fuel system
Maintenance
From a Fischer Panda service manual covering: AGT-DC 10000, AGT10.000-24, PMS AGT-DC 10000, Panda PMS AGT-DC 10000. Check it applies to your exact model before use.
Applies to: Fischer Panda AGT-DC 10000, Fischer Panda Panda PMS AGT-DC 10000, Kubota D722 engine
Before you start
- Use cloth or absorbent paper under connection.
Procedure
- Switch main power switch on control panel to ON.
- Push and hold failure bypass switch; fuel pump must run audibly.
- Run fuel pump 3 to 4 minutes.
- Open bleeding screw on fuel solenoid valve while holding switch.
- Close bleeding screw when fuel runs without bubbles.
- Release failure bypass switch and start unit.
Full service-parts list: Fischer Panda AGT-DC 10000 →, Fischer Panda Panda PMS AGT-DC 10000 →, Kubota D722 engine →
Source: Fischer Panda service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.