Fischer Panda 4000s SC / Panda 4K PMS — Replacing a Thermoswitch
Repair & overhaul
For the Fischer Panda 4000s SC / Panda 4K PMS, from the Fischer Panda owner's manual.
Applies to: Fischer Panda 4000s SC, Fischer Panda Panda 4K PMS, Kubota Z482 engine
Before you start
- Ensure generator cannot be started accidentally; remove battery main switch.
Procedure
- Open the capsule.
- Remove cable ties.
- Disconnect electric supply line of the thermoswitch.
- Loosen thermoswitch with a 22 mm wrench.
- Check label of new thermoswitch for correct item.
- To reinstall, reverse the order of steps.
Tools required
- 22 mm wrench Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Full service-parts list: Fischer Panda 4000s SC →, Fischer Panda Panda 4K PMS →, Kubota Z482 engine →
Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.