Fischer Panda 4000s SC / Panda 4K PMS — Insulation test
Installation · AC electrical system
For the Fischer Panda 4000s SC / Panda 4K PMS, from the Fischer Panda owner's manual.
Applies to: Fischer Panda 4000s SC, Fischer Panda Panda 4K PMS, Kubota Z482 engine
Before you start
- Electrical voltages above 48 volts are dangerous to life.
Procedure
- Switch off all on-board electrical devices.
- Start the generator.
- Measure AC voltage between generator housing and AC-Control box.
- Measure AC voltage between generator housing and ground.
- Measured voltage must not exceed 50 mV.
Tools required
- voltmeter Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Maximum 50 mV
Full service-parts list: Fischer Panda 4000s SC →, Fischer Panda Panda 4K PMS →, Kubota Z482 engine →
Source: Fischer Panda owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.