Fischer Panda 3.5e / PMS 5.5e — Recommissioning

Maintenance · Generator

For the Fischer Panda 3.5e / PMS 5.5e, from the Fischer Panda operator's manual.

Applies to: Fischer Panda PMS 5.5e

Procedure

1. Reconnect raw water hoses.
2. Remove tape on air intakes and exhaust.
3. Charge batteries and reconnect.
4. Install raw water impeller.
5. Perform any scheduled preventative maintenance not performed before long-term storage.
6. Turn the engine over by hand for a couple of revolutions.
7. Perform Pre-operational Checks (Section 3.1).
8. Start engine and check for exhaust, fuel, and water leaks.

Full service-parts list: Fischer Panda PMS 5.5e →

Source: Fischer Panda operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Fischer Panda repair guides →