Fischer Panda 3.5e / PMS 5.5e — Preoperational Checks
Maintenance · Generator
For the Fischer Panda 3.5e / PMS 5.5e, from the Fischer Panda operator's manual.
Applies to: Fischer Panda PMS 5.5e
Before you start
- Hot engine components and coolant may cause severe burns. Do not touch the generator while it is hot.
Procedure
- Make sure generator is shut down.
- Remove the generator capsule top.
- Inspect for leaks at hoses, hose connections, fuel filter, coolant pump, raw water pump, and exhaust.
- Check engine oil level; keep to the maximum on the dipstick.
- Check coolant level in the expansion tank.
- Visually inspect motor and generator mounting screws for tightness.
- Check the sea strainer for debris and clean as necessary.
- Reinstall the capsule top and check the fuel level.
Full service-parts list: Fischer Panda PMS 5.5e →
Source: Fischer Panda operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.