Fischer Panda 3.5e / PMS 5.5e — Air Filter Replacement
Maintenance · Air intake box
For the Fischer Panda 3.5e / PMS 5.5e, from the Fischer Panda operator's manual.
Applies to: Fischer Panda PMS 5.5e
Before you start
- If the generator operates in dusty or dirty environments, the filter may need to be replaced more frequently.
Parts for this job
- 1.1.18 Air filter FridayParts $23.50
Part numbers from the service-parts list for Fischer Panda PMS 5.5e. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Ensure the generator is off first.
- Remove the service side of the top capsule.
- Locate the Air Intake Box at the rear of the generator.
- Unscrew the 6 screws that hold the cover of the air intake box.
- Remove the cover; the filter inside the metal casing is a fiber element.
- Replace the filter as per the maintenance schedule or if it appears dirty.
- Reinstall the cover.
Full service-parts list: Fischer Panda PMS 5.5e →
Source: Fischer Panda operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.