DuroMax XP15000EH — Storage Preparation (30+ days)

Maintenance · fuel system

For the DuroMax XP15000EH, from the DuroMax owner's manual.

Applies to: DuroMax XP15000EH

Procedure

1. Turn off main breaker, run unit 3-5 minutes
2. Turn off fuel valve, allow unit to stall out, turn off key
3. Drain the fuel tank
4. Remove carburetor drain bolt and drain remaining fuel
5. Remove spark plug, add 2 tbsp 10w30 oil into spark plug hole
6. Pull recoil start one time, replace plug
7. Remove battery and place on tender indoors

Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More DuroMax repair guides →