Home›Repair guides›DuroMax›Starting the Generator Using Propane

DuroMax XP15000EH — Starting the Generator Using Propane

Operation · engine

For the DuroMax XP15000EH, from the DuroMax owner's manual.

Applies to: DuroMax XP15000EH

Before you start

  • Make sure there is no possible ignition source close to the generator

Procedure

  1. Shut breaker off
  2. Turn gas valve off
  3. Connect propane hose to regulator
  4. Connect propane tank and turn tank on
  5. Check fuel select switch set to LPG
  6. Open choke
  7. Turn engine switch to START
  8. Turn breaker on and connect devices

Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More DuroMax repair guides →