DuroMax XP15000EH — Changing/Inspecting the Carbon Brushes

Repair & overhaul · generator

For the DuroMax XP15000EH, from the DuroMax owner's manual.

Applies to: DuroMax XP15000EH

Procedure

1. Remove 2 bolts of generator cover and pull cover off
2. Remove bolt holding carbon brush
3. Remove 2 wires from AVR on carbon brush
4. Install new carbon brush with bolt
5. Connect AVR wires, matching + and - correctly
6. Replace generator cover with 2 bolts

Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More DuroMax repair guides →