Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›DuroMax›Changing/Inspecting the AVR

DuroMax XP15000EH — Changing/Inspecting the AVR

Repair & overhaul · generator

For the DuroMax XP15000EH, from the DuroMax owner's manual.

Applies to: DuroMax XP15000EH

Procedure

  1. Remove 2 bolts of AVR located behind power panel
  2. Remove back cover, cut zip ties to brush system
  3. Disconnect wire clip
  4. Reconnect AVR wire to brush system
  5. Replace rear cover
  6. Bolt new replacement AVR onto back of power panel

Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More DuroMax repair guides →