DuroMax XP13000HX — Spark Plug Maintenance
Maintenance · engine
For the DuroMax XP13000HX, from the DuroMax owner's manual.
Applies to: DuroMax XP13000HX
Parts for this job
- 30010-Z010210-00A0 Spark plug buy
Part numbers from the service-parts list for DuroMax XP13000HX. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Pull spark plug cap off
- Unscrew spark plug with spark plug wrench
- Inspect for cracks/chips, discard if damaged
- Measure plug gap, should be 0.7-0.8 mm (0.028-0.031 in)
- Clean and re-gap if reusing
- Install spark plug
- Replace spark plug cap
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- gap 0.7-0.8 mm (0.028-0.031 in)
Full service-parts list: DuroMax XP13000HX →
Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.