DuroMax XP13000HX — Changing/Inspecting the Carbon Brushes
Repair & overhaul · alternator
For the DuroMax XP13000HX, from the DuroMax owner's manual.
Applies to: DuroMax XP13000HX
Procedure
- Remove 2 bolts of generator cover and pull cover off
- Remove bolt holding carbon brush
- Remove 2 wires from AVR on carbon brush
- Install new carbon brush with bolt
- Connect AVR wires, observe polarity
- Replace generator cover with 2 bolts
Full service-parts list: DuroMax XP13000HX →
Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.