DuroMax XP13000HX — Changing/Inspecting the AVR
Repair & overhaul · alternator
For the DuroMax XP13000HX, from the DuroMax owner's manual.
Applies to: DuroMax XP13000HX
Procedure
- Remove 2 bolts of generator cover and pull cover off
- Remove 2 bolts holding the AVR
- Disconnect wire clip
- Remove 2 wires from AVR on carbon brush
- Install new AVR with 2 bolts
- Reconnect wires to brush, observe polarity
- Reconnect wire clip
- Replace generator cover
Full service-parts list: DuroMax XP13000HX →
Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.