DuroMax XP12000E — Spark Plug Maintenance
Maintenance
For the DuroMax XP12000E, from the DuroMax owner's manual.
Applies to: DuroMax XP12000E
Procedure
- Pull spark plug cap off
- Unscrew spark plug with spark plug wrench
- Visually inspect; discard if cracked/chipped, recommend F6RTC/NGK BPR6ES
- Measure plug gap with gauge, should be 0.7-0.8mm (0.028-0.031 in)
- Clean and re-gap if reusing
- Screw spark plug back in
- Replace spark plug cap
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- gap 0.7-0.8 mm (0.028-0.031 in)
Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.