Home›Repair guides›DuroMax›Checking the Oil

DuroMax XP12000E — Checking the Oil

Maintenance · engine

For the DuroMax XP12000E, from the DuroMax owner's manual.

Applies to: DuroMax XP12000E

Procedure

  1. Make sure the generator is on a level surface.
  2. Unscrew the oil filler/dipstick cap.
  3. Wipe the oil off the stick with a dry cloth.
  4. Insert dipstick and remove it again.
  5. If no oil on stick or only at very end, add oil until crankcase is full.
  6. Replace the cap when finished.

Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More DuroMax repair guides →