DuroMax XP12000E — Changing the Oil
Maintenance · engine oil
For the DuroMax XP12000E, from the DuroMax owner's manual.
Applies to: DuroMax XP12000E
Before you start
- Worn out or dirty oil does not cool the generator properly
Procedure
- Unscrew oil drain plug with 12mm hex wrench
- Allow oil to drain into approved container
- Replace drain plug and tighten with 12mm hex wrench
Tools required
- 12mm hex wrench Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: DuroMax owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.