Home›Repair guides›Cummins/Onan›To remove the radiator

Cummins/Onan — To remove the radiator

Repair & overhaul

From a Cummins/Onan service manual — check it applies to your exact model before use.

Applies to: Cummins/Onan HDKC, Cummins/Onan HDKCA, Cummins/Onan HDKCB

Before you start

  • Hot coolant spray can cause severe burns; let engine cool before releasing pressure cap.

Procedure

  1. Disconnect negative battery cable.
  2. Let genset cool down and drain cooling system.
  3. Remove radiator access cover on back of base.
  4. Disconnect two radiator hoses and withdraw radiator out side opening.

Specs & values

  • Replace foam sealing strips around base opening if damaged.
  • Tighten screws to specifications.

Full service-parts list: Cummins/Onan HDKC →, Cummins/Onan HDKCA →, Cummins/Onan HDKCB →

Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →