Cummins/Onan — Tailpipe - Remove and Install

Repair & overhaul

From a Cummins/Onan service manual — check it applies to your exact model before use.

Applies to: Cummins/Onan HGLAA

Procedure

1. Lock-Out-Tag-Out the equipment.
2. Remove the U-bolt clamps, tailpipe hangers, and tailpipe.
3. Clean the components removed using a clean rag.
4. Check the tailpipe and tailpipe hangers; repair or replace if bent, broken, cracked, exhaust leaks, misassembled, or mismatched.
5. Inspect the U-bolt clamps; repair or replace if broken, cracked, exhaust leaks, or misassembled.
6. Install the tailpipe, tailpipe hangers, and U-bolt clamps.
7. Re-Energize the equipment.

Full service-parts list: Cummins/Onan HGLAA →

Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →