Cummins/Onan — Starting at Remote (Meter) Panel
Operation · Generator set
From a Cummins/Onan operator's manual — check it applies to your exact model before use.
Applies to: Cummins/Onan MDKUB, Cummins/Onan MDKWB, Kubota Z482B engine, Kubota D722B engine
Procedure
- Monitor oil pressure, water temperature, and DC voltage while starting and after about one minute of run.
- Oil pressure should be 28 to 64 psi (294 to 543 kPa) at operating temperature.
- Coolant temperature should be 165° to 195° F (74° to 91° C).
- DC voltmeter should read 12.5 to 15 volts.
Specs & values
- Oil pressure 28 to 64 psi (294 to 543 kPa)
- Coolant temperature 165° to 195° F (74° to 91° C)
- DC voltage 12.5 to 15 volts
Full service-parts list: Cummins/Onan MDKUB →, Cummins/Onan MDKWB →, Kubota Z482B engine →
Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.