Cummins/Onan — Shipping Skid Removal (Radiator)
Installation · Radiator cooling system
From a Cummins/Onan service manual — check it applies to your exact model before use.
Applies to: Cummins/Onan DQKB, Cummins/Onan DQKC, Cummins/Onan QSK60 engine
Before you start
- Use a hoist of sufficient capacity, do not stand under a raised radiator and keep hands and feet clear.
Procedure
- Cut cable ties and remove radiator parts (hoses, fan drive belt, wiring harness) from fan blade guard.
- Attach hoist to lifting channels at top and bottom of radiator; use four cables.
- Hoist radiator, remove packing crate, place wooden blocks and lower radiator onto blocks.
- Position radiator onto its back (fan pulley facing upward) using hoist.
- Attach hoist to ALL FOUR lifting brackets mounted to top of radiator assembly.
- Raise the radiator into the vertical position without damaging protruding pipework.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Approximate radiator dry weight 5,000 pounds (2,250 kg)
Full service-parts list: Cummins/Onan DQKB →, Cummins/Onan DQKC →
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.