Home›Repair guides›Cummins/Onan›Fuel Filter (Spin-On Type) - Remove

Cummins/Onan QSX15 / QSx15 — Fuel Filter (Spin-On Type) - Remove

Maintenance

For the Cummins/Onan QSX15 / QSx15, from the Cummins/Onan operator's manual.

Applies to: Cummins/Onan QSx15, Cummins/Onan QSX15 engine

Before you start

  • Fuel is flammable. Keep all cigarettes, flames, pilot lights, arcing equipment, and switches out of work area.

Procedure

  1. Clean area around fuel filter head and filter. Disconnect wiring harness from water-in-fuel sensor.
  2. Remove fuel filter with filter wrench, Part No. 3375049.
  3. Use clean lint-free towel to clean filter head gasket surface.

Tools required

  • 3375049 Oil and Fuel Filter Wrench Amazon

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Full service-parts list: Cummins/Onan QSx15 →

Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →