Cummins/Onan — Pre-Start Installation Checks
Installation · Complete installation
From a Cummins/Onan service manual — check it applies to your exact model before use.
Applies to: Cummins/Onan MDKAL, Kubota D1005 engine
Before you start
- Oil, coolant, and fuel have been drained from the engine at the factory prior to shipment. Operation without oil and coolant will damage the engine.
Procedure
- Confirm exhaust system secure, correctly routed and connections tight.
- Confirm flexible marine exhaust hose section between genset and muffler.
- Confirm exhaust outlet terminates away from windows, vents and openings.
- Confirm AC generator and load wires securely connected to the correct-size circuit breaker.
- Confirm battery cables connected correctly and securely at genset and battery.
- Confirm engine coolant (50/50 mix) and crankcase oil have been added to correct levels.
Full service-parts list: Cummins/Onan MDKAL →, Kubota D1005 engine →
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.