Home›Repair guides›Cummins/Onan›Pre-start Checks

Cummins/Onan — Pre-start Checks

Operation · Generator set

From a Cummins/Onan operator's manual — check it applies to your exact model before use.

Applies to: Cummins/Onan HDKC

Before you start

  • Exhaust gas is deadly - carbon monoxide is poisonous and can cause unconsciousness and death

Procedure

  1. Make sure all vehicle CO detectors are working properly.
  2. Remove access cover.
  3. Inspect the generator set as instructed in the Maintenance chapter.
  4. Perform any maintenance due.
  5. Keep a maintenance log.
  6. Check for signs of fuel and exhaust leaks and for damage to the exhaust system.
  7. Replace access cover.
  8. Turn off the air conditioner and other large appliances.

Specs & values

  • Perform before the first start of the day and after every 8 hours of operation

Full service-parts list: Cummins/Onan HDKC →

Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →