Cummins/Onan P4500iDF — Reprogramming the Remote Start

Operation · remote start key fob

For the Cummins/Onan P4500iDF, from the Cummins/Onan owner's manual.

Applies to: Cummins/Onan P4500iDF

Procedure

1. Turn the generator battery switch to the ON position.
2. Push and hold the ON/OFF button for 10 seconds, then release.
3. The start indicator light will flash green.
4. Push the ON button on the remote start key fob to pair automatically.

Full service-parts list: Cummins/Onan P4500iDF →

Source: Cummins/Onan owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →