Home›Repair guides›Cummins/Onan›Connect the Battery

Cummins/Onan P4500iDF — Connect the Battery

Installation

For the Cummins/Onan P4500iDF, from the Cummins/Onan owner's manual.

Applies to: Cummins/Onan P4500iDF

Parts for this job

Part numbers from the service-parts list for Cummins/Onan P4500iDF. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Push down the battery access cover tab and pull the cover forward to remove it.
  2. Verify the rubber battery strap firmly secures the battery in place.
  3. Remove the cable tie securing the quick-connect plugs.
  4. Push firmly to connect the quick-connect plugs.
  5. Align the tabs on the cover and push to reinstall the cover.

Full service-parts list: Cummins/Onan P4500iDF →

Source: Cummins/Onan owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →