Home›Repair guides›Cummins/Onan›Oil Filter Replacement

Cummins/Onan — Oil Filter Replacement

Maintenance

From a Cummins/Onan operator's manual — check it applies to your exact model before use.

Applies to: Cummins/Onan MDJA, Cummins/Onan MDJC

Parts for this job

Part numbers from the service-parts lists for Cummins/Onan MDJA, Cummins/Onan MDJC. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Place a drip pan below the filter.
  2. Unscrew the oil filter counterclockwise using both hands or a strap-type filter wrench.
  3. Clean the filter mounting area.
  4. Install the new filter hand tight, then 1/4 turn additional using a filter wrench.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

  • Hand tight plus 1/4 turn.

Full service-parts list: Cummins/Onan MDJA →, Cummins/Onan MDJC →

Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →