Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Cummins/Onan›Install the Fan Drive Guard (Spec. B)

Cummins/Onan — Install the Fan Drive Guard (Spec. B)

Installation

From a Cummins/Onan service manual — check it applies to your exact model before use.

Applies to: Cummins/Onan DQKB, Cummins/Onan DQKC, Cummins/Onan QSK60 engine

Before you start

  • Contact with fan, belt, or pulleys can result in severe personal injury. All shroud and guard pieces must be properly fastened.

Procedure

  1. Assemble the fan guard with M8 x 25 mm self-locking hex washer head screws.
  2. Attach the lower guard to the cooling system frame and the lower front guard to the lower guard.
  3. Install the left and right side brackets.
  4. Install the upper front guard.
  5. Install the upper guard.
  6. Install the rear guard.
  7. Check all fan guards are in place and secure.

Full service-parts list: Cummins/Onan DQKB →, Cummins/Onan DQKC →

Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →