Cummins/Onan — Entering Password
Operation · PowerCommand control
From a Cummins/Onan service manual — check it applies to your exact model before use.
Applies to: Cummins/Onan DFE
Procedure
- Display submenu to modify.
- Press either the + or - button within the displayed submenu; the Password menu appears.
- Press + and - buttons to select the first character of the password (A-Z or 0-9).
- Press the arrow (→) button to select the next character field.
- Repeat steps 3 and 4 to enter remaining password characters.
- Press the Enter button after entering the password; the submenu selected in step 1 reappears.
- After making desired changes to submenu, exit submenu to save changes.
Specs & values
- Entered password is valid for only 10 minutes after the last button is pressed
- Default Application password: GENSET
- User password initially left blank
Full service-parts list: Cummins/Onan DFE →
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.