Cummins/Onan — Enclosure Door - Remove and Install
Maintenance
From a Cummins/Onan service manual — check it applies to your exact model before use.
Applies to: Cummins/Onan HGLAA
Before you start
- Solvent Exposure: Skin and eye irritation may occur. Follow manufacturer's instructions for use. Wear appropriate personal protective equipment.
Procedure
- Turn the latch clockwise to open.
- Remove the enclosure door.
- Clean the components removed using solvent and a clean rag.
- Check the enclosure door; repair or replace if bent, broken, cracked, cosmetically unacceptable, misassembled, mismachined, or wrong parts.
- Install the enclosure door.
- Turn the latch counterclockwise to close.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Full service-parts list: Cummins/Onan HGLAA →
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.