Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Copyright © 2024 Cummins Inc.

Cummins/Onan — Copyright © 2024 Cummins Inc.

For these Cummins/Onan models: HDKAH, HDKAK.

Applies to: Cummins Onan Hdkah, Cummins Onan Hdkak

Procedure

  1. Use a forklift to support the generator set. Raise the lift so it contacts the bottom of the generator set
  2. Loosen the bolts between the generator set base pan and side mounting panels (loosen bolts about
  3. Loosen the bolts securing the side panels to the rear panel (note slotted holes) or braces and pull
  4. Retighten side panels to back panel bolts.
  5. Remove the mounting bolts securing the side and rear panels to the generator set.
  6. Slowly lower the generator set until it clears all obstructions and can be safely moved out from under

Source: manual:0981-0522-i32-hdkax-service-manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.