Cummins/Onan — Air Cleaner Element Removal
Maintenance · Normal duty air cleaner
From a Cummins/Onan operator's manual — check it applies to your exact model before use.
Applies to: Cummins/Onan GGHG, Cummins/Onan GGHH, Ford V-10 6.8L engine
Before you start
- Holes, loose-end seals, dented sealing surfaces, corrosion of pipes and other damage render the air cleaner inoperative and require immediate element replacement or engine damage can occur.
Procedure
- Before disassembly, wipe dirt from the cover and the upper portion of the air cleaner.
- Loosen the wing bolt (2) and remove the band clamp securing the dust pan (1).
- Remove the dust shield (3) from the dust pan (1).
- Clean the dust pan and shield.
- Remove the wing nut (5) that secures the air cleaner element (4) in the air cleaner housing.
- Inspect the rubber sealing washer on the wing nut.
- Remove the dirty cleaner element (4). Dispose of the dirty element in accordance with local environmental agency requirements.
Full service-parts list: Cummins/Onan GGHG →, Cummins/Onan GGHH →
Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.