Cummins/Onan — Air Cleaner Element Installation
Maintenance · Normal duty air cleaner
From a Cummins/Onan operator's manual — check it applies to your exact model before use.
Applies to: Cummins/Onan GGHG, Cummins/Onan GGHH, Ford V-10 6.8L engine
Procedure
- Install the air cleaner element (4) in the air cleaner housing.
- Inspect the rubber sealing washer and make sure it is in place under the wing nut (5).
- Tighten the wing nut (5) that secures the element (4) in the air cleaner housing.
- Assemble the dust shield (3) and the dust pan (1).
- Position the dust shield (3) and dust pan (1) on the air cleaner housing and secure them with the band clamp wing bolt (2).
Full service-parts list: Cummins/Onan GGHG →, Cummins/Onan GGHH →
Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.