Home›Repair guides›Cummins/Onan›Replacing the Fuel Filter

Cummins/Onan A052J727 — Replacing the Fuel Filter

Maintenance · Fuel system

For the Cummins/Onan A052J727, from the Cummins/Onan operator's manual.

Applies to: Cummins/Onan MDKD

Before you start

  • Accidental or remote starting can cause severe personal injury or death.

Parts for this job

Part numbers from the service-parts list for Cummins/Onan MDKD. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Disconnect the negative battery cable.
  2. Open the front access door.
  3. Close any fuel supply and return valves.
  4. Spin off the old filter with a filter wrench.
  5. Clean the filter base and lubricate the new gasket.
  6. Hand tighten the new filter.
  7. Open the fuel valves and prime at least 30 seconds.
  8. Check for leaks; retighten by hand if necessary.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

  • Prime at least 30 seconds

Full service-parts list: Cummins/Onan MDKD →

Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →