Cummins/Onan 80MDKAL11454B — Engine Oil Change
Maintenance · engine crankcase
For the Cummins/Onan 80MDKAL11454B, from the Cummins/Onan operator's manual.
Applies to: Cummins/Onan MDKAL, Kubota D1005 engine
Before you start
- Hot crankcase oil can cause burns; keep hands clear and wear protective clothing.
- Contact with used engine oil can cause cancer or reproductive toxicity; wash hands after use.
- Use one wrench to hold the fitting and another to loosen the plug to avoid damage to the drain hose.
Parts for this job
- 7665025430 Oil filter — Cummins/Onan MDKAL Amazon eBay $22.12 PartsGeek $7.98 NAPA $13.30
- 7665025430 Oil filter — Kubota D1005 engine Amazon eBay $22.12 PartsGeek $7.98 NAPA $13.30
Part numbers from the service-parts lists for Cummins/Onan MDKAL, Kubota D1005 engine. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Run the engine until thoroughly warm.
- Stop the engine and unscrew the plug on the end of the drain hose.
- Drain the oil into a suitable container.
- When the oil is completely drained, replace the plug and return the hose to its storage position.
- Refill the crankcase with new oil and dispose of used engine oil properly.
Tools required
- wrench (to hold drain hose fitting and loosen plug) Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Refill with 4.25 L (4.5 qt) including filter
Full service-parts list: Cummins/Onan MDKAL →, Kubota D1005 engine →
Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.