Cummins/Onan 80MDKAL11454B — Draining Water/Sediment From Fuel Filter
Maintenance
For the Cummins/Onan 80MDKAL11454B, from the Cummins/Onan operator's manual.
Applies to: Cummins/Onan MDKAL, Kubota D1005 engine
Before you start
- Dirt or water in the system will cause severe damage to both the injection pump and the injection nozzles.
Parts for this job
Part numbers from the service-parts lists for Cummins/Onan MDKAL, Kubota D1005 engine. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Open the drain plug on the fuel filter assembly.
- Collect water and fuel in a suitable container and dispose of it properly.
- Tighten the drain plug.
Specs & values
- Drain about 1/4 cup (60 ml) of fuel; refer to Table 4 for the recommended time interval
Full service-parts list: Cummins/Onan MDKAL →, Kubota D1005 engine →
Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.