Cummins/Onan 627.20199 — Retorque cylinder head bolts
Maintenance
For the Cummins/Onan 627.20199, from the Cummins/Onan owner's manual.
Applies to: Craftsman 627.20199
Procedure
- Tighten bolts in the order designated in Figure 27.
- Tighten to specified assembly torque at room temperature.
- After engine reaches normal hot temperature and cools, retorque.
- Do this before engine has run fifty operating hours.
Tools required
- Torque wrench Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Refer to table of ASSEMBLY TORQUES
Full service-parts list: Craftsman 627.20199 →
Source: Cummins/Onan owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.