Home›Repair guides›Cummins/Onan›Battery Servicing

Cummins/Onan 50.0 DDB 15R / 50.0 DDB 15R J 1 Q — Battery Servicing

Maintenance · Starting batteries

For the Cummins/Onan 50.0 DDB 15R / 50.0 DDB 15R J 1 Q, from the Cummins/Onan operator's manual.

Applies to: Cummins/Onan 50.0 DDB 15R, John Deere 6329D engine

Before you start

  • Do not smoke while servicing batteries; lead acid batteries give off explosive gases while being charged.

Parts for this job

  • 416-0531 Battery — Cummins/Onan 50.0 DDB 15R Amazon eBay

Part numbers from the service-parts lists for Cummins/Onan 50.0 DDB 15R, John Deere 6329D engine. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Check the condition of the starting batteries at least every two weeks.
  2. See that connections are clean and tight; coat with non-conductive grease.
  3. Keep electrolyte at the proper level above the plates by adding distilled water.
  4. Check specific gravity; recharge if below 1.260.

Specs & values

  • Specific gravity 1.260 at 80F (26.7C)

Full service-parts list: Cummins/Onan 50.0 DDB 15R →, John Deere 6329D engine →

Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →